VIBtransmitter VT1002D - Vibration monitoring system with 2 relay outputs

The VIBtransmitter VT1002D is an upgraded version of the VT1000 module with 2 relay outputs, which can work independently performing the warning and alarm functions. The device has a built-in display showing current measured vibration signal value. The configuration is made with 3 buttons and DIP switches. The 4..20mA current output for signal estimate (RMS, PEAK) makes it possible to directly connect the VT1002D into the monitored machine control system. The device in very compact and DIN rail mountable, which simplifies the integration with PLC system inside of typical control cabinets.

Key parameters

Sensor type ICP® 100mV/g
Measured values velocity or acceleration
Calculated estimates RMS or 0-PEAK
Default masurement range 0-100 mm/s or m/s2
Power supply 24 VDC
Power consumption < 4 W
Low pass filter 1 or 10 kHz, 24 dB/oct
High pass filter 3 lub 10 Hz, 12 dB/oct
Insulation 1.0 kV
Current output 4...20mA
Voltage output AC, 10Vpp max
Warning relay 100mA/24V
Alarm relay 100mA/24V
Operational temperature -20 to 60 °C
Humidity < 95% RH
IP Code IP40
Dimensions 23 mm x 100 mm x 120 mm (w x h x l)
Mounting 35mm DIN rail